Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Highly efficient electrocatalysts fabricated via electrophoretic deposition for alcohol oxidation,oxygen reduction,hydrogen evolution,and oxygen evolution reactions

Electrophoretic deposition (EPD) is a versatile technique that has drawn attention due to its ease of use and performance in depositing high-quality layers at room temperature. This technique principle is based on the deposition of charged particles from a stable colloidal suspension on a conductive substrate using either a direct or alternating current. Using relatively simple and low-cost equipment, the EPD technique enables the deposition of layers with controlled microstructures at nanoscale. The EPD technique has been particularly successful in the fabrication of the electrocatalyst layers for low-temperature fuel cells, which are anchored on the top of the fuel cell electrodes. In comparison with other electrocatalyst layer deposition techniques such as drop-casting, the EPD technique offers clear advantages for the control of the thickness and packing density of the electrocatalyst layers. Owing to the dense packing density, electrocatalyst layers deposited by EPD could achieve enhanced conductivity and efficiency. The present review aims at comprehensively evaluating the recently published results on the electrocatalyst layers fabricated by EPD and applied in oxygen reduction reactions, alcohol electro-oxidation reactions, hydrogen evolution reactions, and oxygen evolution reactions.     

On the Genesis of the Marshall-Olkin Family of Distributions via the T-<i>X</i> Family Approach: Statistical Modeling

In the last couple of years, there Has been an increased interest among the statisticians to define new families of distributions by adding one or more additional parameter(s) to the baseline distribution. In this regard, a number of families have been introduced and studied. One such example is the Marshall-Olkin family of distributions that is one of the most prominent approaches used to generalize the existing distributions. Whenever, we see a new method, the natural questions come in to mind are (i) what are the genesis of the newly proposed method and (ii) how did the proposed method is obtained. No doubt, the Marshall-Olkin family is a very useful method and has attracted the researchers. But, unfortunately, the authors failed to provide the explanation about the genesis of the method that how this family of distributions is obtained. To address this issue, in this article, an attempt Has been made to provide a straight forward computation about the genesis of the Marshall-Olkin family that somehow completes its derivation. The genesis of the Marshall-Olkin family is based on the T-X family approach. Furthermore, we have showed that other extensions of the Marshall-Olkin family can also be obtained via the T-X family method. Finally, a real-life application form insurance science is presented to illustrate the newly proposed extension of the Marshall-Olkin family.     

Unsteady 3D mixed convection flow of a chemically reactive Oldroyd-B nanofluid configured by a periodically accelerated surface

Fundamental developments in nanotechnology have attracted the attention of scientists towards the interaction of nanoparticles due to their fascinating applications in thermal engineering and solar energy systems. Convinced by such motivating applications, the current research project addresses the utilization of nanoparticles in the unsteady three-dimensional chemically reactive flow of an Oldroyd-B fluid induced by a bidirectional oscillatory stretching surface. The effects of mixed convection are also considered here. The prime features of the nanofluid namely thermophoresis and Brownian motion characteristics are explored by introducing the famous Buongiorno's nanofluid model. The relevant equations for the formulated theoretical model have been reduced by the appropriate transformations for which the analytic solution is deliberated via the homotopic technique. Later on, a complete graphical analysis for distinct flow parameters is deliberated for dimensionless velocities, concentration, and temperature distributions with the relevant physical implications. Moreover, stimulating physical quantities like local Nusselt and Sherwood numbers are numerically calculated and discussed. The study emphasizes that decreasing variation in both components of velocities has been reported with an increment of relaxation time, while the impact of the retardation time constant is quite opposite. It is further claimed that the velocity distribution has an increasing tendency in the horizontal direction for a higher buoyancy ratio and mixed convection parameters. Moreover, an increment in thermophoresis parameter enhances both temperature and concentration distributions.     

Interactions between hybrid nanosized particles and convection melting inside an enclosure with partially active walls: 2D lattice Boltzmann-based numerical investigation

The ice melting is investigated inside a square cavity with two isothermally partially active walls. The concept of dispersing hybrid alumina–Cu nanoparticles and hybrid silica–multiwalled carbon nanotubes (MWCNTs) nanoparticles is recommended for thermal performance enhancement in this thermal energy storage (TES) system. The two-dimensional explicit lattice Boltzmann convection melting scheme in the single-phase model is applied to account for the natural convection flow induced in the melt region and evolution of the solid–liquid interface. The complete melting time for the pure phase change material (PCM) using case (II) is 33.3% lower compared with other cases. If the price of hybrid Al₂O₃–Cu nanoparticles and heat storage capacity is important, the full melt time diminishes by 16.6% with a volume fraction of 0.01 in case (II). Once hybrid silica–MWCNT nanoparticles with a volume fraction of 0.01 are utilized inside case (II), the lowest charging time is achieved. The complete melting time abates by 23.66% in contrast to the pure PCM melting. The use of single/hybrid nanoparticles to enhance the PCM melting is not necessarily economical as efficient positions of active parts could further lessen the charging time. The efficiency of hybrid nanoparticles is linked to the type and weight proportions of nanoparticles, and positions of thermally active parts.     

Progressive failure analysis of notched composite plate by utilizing macro mechanics approach

In this study, gradual and sudden reduction methods were combined to simulate a progressive failure in notched composite plates using a macro mechanics approach. Using the presented method, a progressive failure is simulated based on a linear softening law prior to a catastrophic failure, and thereafter, sudden reduction methods are employed for modeling a progressive failure. This combination method significantly reduces the computational cost and is also capable of simultaneously predicting the first and last ply failures (LPFs) in composite plates. The proposed method is intended to predict the first ply failure (FPF), LPF, and dominant failure modes of carbon/epoxy and glass/epoxy notched composite plates. In addition, the effects of mechanical properties and different stacking sequences on the propagation of damage in notched composite plates were studied. The results of the presented method were compared with experimental data previously reported in the literature. By comparing the numerical and experimental data, it is revealed that the proposed method can accurately simulate the failure propagation in notched composite plates at a low computational cost.     

Antioxidant and α-glucosidase inhibitory activities of eight neglected fruit extracts and UHPLC-MS/MS profile of the active extracts

The 70% ethanolic extracts from eight neglected fruits; Muntingia calabura, Leucaena leucocephala, Spondias dulcis, Syzygium jambos, Mangifera caesia, Ardisia elliptica, Cynometra cauliflora and Ficus auriculata were evaluated for their 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging, α-glucosidase inhibitory activities as well as total phenolic content. The results of this study revealed that M. caesia fruit extract demonstrated the most potent radical scavenging activity. Among the fruits examined for α-glucosidase inhibitory activity, M. calabura and F. auriculata exhibited strong activity with no significant difference. The Pearson correlation indicated that the activities of M. caesia and F. auriculata contributed by phenolic compounds. A total of 65 metabolites were tentatively identified by using ultra-high-performance liquid chromatography tandem mass spectrometry (UHLPC-MS/MS). These findings suggested that the possible application of M. caesia and F. auriculata as a functional food with antioxidant and α-glucosidase inhibitory properties.     

Egg white proteins and β-cyclodextrin: effective cryoprotectant mixture against oxidative changes in the myofibrillar proteins of Culter alburnus

The effect of egg white protein (EWP) and β-cyclodextrin (β-CD) mixture was analysed on the myofibrillar proteins (MP) of Culter alburnus during a frozen storage at −18 °C for 60 days. Different proportions of EWP:β-CD mixture (0%, 2%, 4% and 6%) were added into MP to analyse their effect against oxidative changes. During the study, sulphydryl contents and Ca-ATPase activity (0.297 to 0.136 mmol g⁻¹) decreased. Moreover, protein denaturation also prompted the surface hydrophobicity (11.47 to 32.06 μg) and carbonyls (26.36 to 49 mg.28 nmol mg⁻¹) of control MP. A significant decline was observed in emulsifying properties. Besides, EWP:β-CD showed remarkable stability against oxidative changes, by significantly reducing the carbonyls (26.26 to 37.69 nmol mg⁻¹) and surface hydrophobicity (11.51 to 20.31 μg) and also the decline of Ca-ATPase activity (0.29 to 0.19 mmol g⁻¹). It can be concluded that EWP:β-CD (6%) is an efficient approach against oxidative changes in MP from Culter alburnus.